Information on pairing Bluetooth® devices
Pairing the first Bluetooth® device
Select the [PHONE] button on the audio system or the [CALL] button on the steering wheel remote control ➟ Search for the vehicle from the Bluetooth® device, and pair ➟ Enter the passkey on the Bluetooth® device or approve passkey ➟ Bluetooth® pairing completed
1. When the [PHONE] button on the audio or the [CALL] button on the steering wheel remote control is pressed, the following screen is displayed. Devices can now be paired.
(1) Device name(Vehicle name): Searched name in Bluetooth® device.
(2) Passkey:Passkey for device pairing.
✽ NOTICE
The device name(vehicle name) in the image above is an example. Refer to your device for the actual name of your device.
2. Search for available Bluetooth® devices in the Bluetooth® menu of your Bluetooth® device (cell phone, etc.).
3. Confirm that the device name (vehicle name) in your Bluetooth® device matches the device name (vehicle name) shown on the audio screen, then select it.
4-1. For devices that require passkey entry, a passkey entry screen is shown on your Bluetooth® device.
- Enter the passkey ‘0000’, shown on the audio screen, in your Bluetooth® device.
4-2. For devices that require passkey confirmation, the following screen is shown
on the audio system. A 6-digit passkey input screen is shown in the Bluetooth® device.
- After confirming that the 6-digit passkey on the audio screen and the Bluetooth®
device are identical, press [OK] in your Bluetooth® device.
✽ NOTICE
The 6-digit passkey in the image above is an example. Refer to your vehicle for the actual passkey
Pairing a second Bluetooth® device
Press the [SETUP] button on the audio system ➟ Select [Phone] ➟ Select [Connections] ➟ Select [Add new(Add New)].
- The pairing procedure from this point is identical to [Pairing the first Bluetooth® device].
✽ NOTICE
Kia Niro 2017 (DE HEV) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specific ...
Kia Niro 2017 (DE HEV) Service Manual: Input Speed Sensor Repair procedures
Removal
1.
Remove the clutch actuator.
(Refer to Dual Clutch Transmission Control System - "Clutch Actuator
Assembly")
2.
Remove the connector from the bracket after disconnecting the connector
and then remove the input spee ...