Kia Niro: Lighting System / Overhead Console Lamp Repair procedures

Inspection
1.

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the two mounting screws.

And then remove the overhead console (A).

3.

Remove the overhead console after disconnecting the connectors (A).

Installation
1.

Install the overhead console lamp after connecting the connector.

2.

Install the lens after tightening 2 screws.

Vanity Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. 3. ...

Hazard Lamp Switch Repair procedures
Inspection 1. Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch. [Audio Type] Connector Pin ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Shift Lever Repair procedures
Removal 1. Shift the gear to "N". 2. Remove the knob (A) by pulling it in the direction of arrow after removing the boots from the console upper cover. 3. Remove the floor console assembly. (Ref ...

Kia Niro 2017 (DE HEV) Service Manual: Radiator Components and components location
Components 1. Reservoir tank 2. Radiator reservoir hose & pipe 3. Radiator 4. Radiator upper hose 5. Radiator lower hose 6. Radiator upper bracket [RH] 7. Radiator upper bracket [LH] 8. Radiator lower mounting insulator [RH] 9 ...

© 2016-2022 www.kniro.net