Kia Niro: Ignition switch position / ON
The warning lights can be checked before the engine is started. This is the normal running position after the engine is started.
Do not leave the ignition switch ON if the engine is not running to prevent battery discharge.
ACC (Accessory)
The steering wheel is unlocked and electrical accessories are operative.
✽ NOTICE
If difficulty is experienced turning the ignition switch to the ACC position,
turn the key while turning the ste ...
START
Turn the ignition key to the START position to start the engine. The engine will
crank until you release the key; then it returns to the ON position. The brake warning
lamp can be checked in this ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components Location
1. Hybrid Power Control Unit (HPCU)
2. Hybrid Control Unit (HCU)
3. Brake Switch
4. DC Fuse
HPCU includes the HCU (Hybrid Control Unit), Inverters ...
Kia Niro (DE HEV) Owners Manual: To cancel cruise control, do one of the following
Depress the brake pedal.
Shift into N (Neutral) if equipped with an Dual clutch transmission.
Press the CANCEL/O button located on the steering wheel.
Decrease the vehicle speed lower than the memory speed by approximately
20 km/h (12 mph).
Decrease the vehicle speed to less than app ...
