Removal and Installation |
1. |
Remove the timing chain cover. (Refer to Timing System – “Timing Chain Cover”) |
2. |
Remove the oil level gauge pipe. (Refer to Lubrication System - "Oil Level Gauge & Pipe") |
3. |
Remove the oil pump cover (A).
|
4. |
Remove the inner rotor (A) and outer rotor (B).
|
5. |
Install in the reverse order of removal. |
Inspection |
1. |
Remove the relief plunger. Remove the plug (A), spring (B) and relief plunger (C).
|
2. |
Inspect the relief plunger. Coat the plunger with engine oil and check that it falls smoothly into the plunger hole by its own weight. If necessary, replace timing chain cover. |
3. |
Inspect the relief valve spring. Inspect for distortion or breakdown of the relief valve spring. |
4. |
Inspect the rotor side clearance. Using a feeler gauge and precision straight edge, measure the clearance between the inner rotors and precision straight edge. If the side clearance is greater than maximum, replace the rotors as a set. If necessary, replace the timing chain cover.
|
5. |
Inspect the rotor body clearance. Using a feeler gauge, measure the clearance between the outer rotor and body. If the body clearance is greater than maximum, replace the rotors as a set. If necessary, replace the timing chain cover.
|
6. |
Inspect the rotor guide clearance.
|
Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure t ...
Kia Niro 2017 (DE HEV) Service Manual: Antenna Repair procedures
Removal
Roof antenna
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.
Disconnect the roof antenna cable and connector (A).
...