Kia Niro: Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.

Remove the oil level gauge (A).

2.

Remove the timing chain cover.

(Refer to Timing System - "Timing Chain Cover")

3.

Remove the Oil level gauge pipe (A).

Tightening torque :

8.8 - 13.7 N·m (0.9 - 1.4 kgf·m, 6.5 - 10.1 lb·ft)

4.

Install in the reverse order of removal.

Oil Pressure Switch Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. (Refer to Engine and Transaxle As ...

Timing System
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Front seat belt retractor 2. Height adjuster 3. Rear seat belt retractor [side] 4. Rear seat belt retractor [center] ...

Kia Niro (DE HEV) Owners Manual: Headlamp aiming
1. Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools. 2. The vehicle should be placed on a flat floor. 3. Draw vertical lines (Vertical lines passing through respective head lamp centers) and a horizontal line (Horizont ...

© 2016-2023 www.kniro.net