Kia Niro: Hybrid Motor Control System / Motor Temperature Sensor Repair procedures

Inspection

Hybrid Drive Motor

1.

Inspect the temperature sensor resistance.

Item
Pin
Specification
Remarks
Resistance
(Temperaturesensor)
4 - 8
10.92 - 13.44 kΩ
At room temperature 68°F (20°C)

2.

If the temperature sensor needs to be replaced, replace the hybrid drive motor assembly.

(Refer to Hybrid Motor Assembly - "Hybrid Drive Motor Assembly")

Hybrid Starter Generator (HSG)

1.

Inspect the temperature sensor resistance.

Item
Pin
Specification
Remarks
Resistance
(Temperaturesensor)
4 - 9
121.6 - 133.14 kΩ
At room temperature 68°F (20°C)

2.

If the temperature sensor needs to be replaced, replace the HSG assembly.

(Refer to Hybrid Motor Assembly - "Hybrid Starter Generator")

Motor Temperature Sensor Circuit diagram
Part Circuit Diagram [Hybrid Drive Motor] [HSG] ...

Hybrid Motor Cooling System
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: BMS ECU Schematic diagrams
BMS ECU Terminal And Input/Output Signal Connector [B01-VC] (24pin) : High Voltage Battery Cell Voltage Check Connector Pin No. Description Connected to 1 - - 2 ...

Kia Niro (DE HEV) Owners Manual: Head lamp low beam (LHD)
1. Turn the low beam on without driver aboard. 2. The cut-off line should be projected in the cut-off line shown in the picture. 3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming. 4. If head lamp leveling device is equipped, adjust the head la ...

© 2016-2024 www.kniro.net