Removal |
1. |
Before removing the driver side seat assembly, pull it upward to the maximum by pushing the front seat height adjusting switch (A).
|
2. |
Disconnect the negative (-) battery terminal |
3. |
Remove the driver front seat assembly. (Refer to Body - "Front Seat Assembly") |
4. |
Disconnect the IMS unit connectors (A).
|
5. |
Remove the IMS unit (A) after loosening the mounting screws.
|
Installation |
1. |
Install the memory power seat unit. |
2. |
Install the driver front seat assembly. |
3. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: Rear Door Latch Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
Kia Niro 2017 (DE HEV) Service Manual: Exhaust Manifold Repair procedures
Removal and Installation
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Remove the air cleaner.
(Refer to Intake and Exhaust System - "Air Cleaner")
...