Kia Niro: Integrated Memory System (IMS) / Memory power seat unit Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Integrated Memory System (IMS) / Memory power seat unit Components and components location

Components

Connector Pin Information

No.	Connecter A	Connecter B	Connecter C
1	-	Battery (+)	Slide switch signal (Forward)
2	Reclining motor (Forward)	Ground	Reclining switch signal (Forward)
3	Rear height motor (Up)	Battery (+)	Front tilt switch signal (Up)
4	Slide motor (Forward)	-	Rear height switch signal (Up)
5	-	Ground	-
6	Reclining motor (Backward)	?	Body-CAN (High)
7	Front tilt motor (Up)		Body-CAN (Low)
8	Front tilt motor (Down)		IMS Switch1
9	Rear height motor (Down)		Reclining limit switch (Forward)
10	Slide motor (Backward)		Slide sensor
11	?		Front tilt sensor
12			-
13			Seat position sensor power
14			IGN1
15			Slide switch signal (Backward)
16			Reclining switch signal (Backward)
17			Front tilt switch signal (Down)
18			Rear height switch signal (Down)
19			-
20			Ground
21			SET Switch
22			IMS Switch2
23			Reclining limit switch (Backward)
24			Reclining sensor
25			Seat rear height sensor
26			-
27			-
28			Battery (+)

Description and operation

Description The optimum seat position set by the driver is memorized in the power seat unit by IMS switch control to be recalled by using the IMS switch even if the seat position has ...

Memory power seat unit Schematic diagrams

Circuit Diagram ...

Other information:

Kia Niro (DE HEV) Owners Manual: Jump starting procedure
1.Make sure the booster battery is 12-volt and that its negative terminal is grounded. 2.If the booster battery is in another vehicle, do not allow the vehicles come in contact. 3.Turn off all unnecessary electrical loads. 4.Connect the jumper cables in the exact sequence shown in the illustr ...

Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure t ...