Peugeot 2008: Instruments / Manual test. Total distance recorder
Manual test
This function allows you to check certain indicators and display the alerts log.
It can be accessed via the "Check"
button in the Driving/Vehicle touch screen menu.
The following information is displayed on the instrument panel:
- Engine oil level.
- Next service due.
- Tyre pressures.
- Driving range associated with the AdBlue and the SCR system (BlueHDi Diesel).
- Current alerts.
This information is also
displayed automatically every time the ignition is switched on.
Total distance recorder
The total distance recorder measures the total distance travelled by the vehicle since its initial registration.
With the ignition on, the total distance is displayed at all times. It remains displayed for 30 seconds after switching off the ignition. It is displayed when the driver's door is opened, and when the vehicle is locked or unlocked.
When travelling abroad,
you may have to change the distance units (km or miles): the road speed must be
displayed in the local country’s official unit (km/h or mph).
The unit is changed via the screen configuration menu, with the vehicle stationary.
Thermal comfort consumption indicator (Electric)
The gauge shows the consumption of electric power for thermal comfort
functions.
It concerns the following equipment and systems:
Heating.
Air conditioning.
Front demisting/defrosting.
Rear scr ...
Lighting dimmer
This system allows the brightness of the instruments and controls to be
adjusted to suit the ambient light level.
With PEUGEOT Connect Radio
Press this button to select
the Settings menu.
Sele ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: General information
General
The supplemental restraint system (SRS) is designed to supplement the seat belt
to help reduce the risk or severity of injury to the driver and passenger by activating
and deploying the driver, passenger, side airbag and belt pretensioner in certain
frontal or side collisi ...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolts, adjust the hood (B) by
moving it up and down, or right and left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
3.
After loosening the ...
