Kia Niro: Engine compartment fuse replacement / Main fuse

If the main fuse is blown, it must be removed as follows:

1. Turn off the engine.

2. Disconnect the negative battery cable.

3. Remove the nuts shown in the picture above.

4. Replace the fuse with a new one of the same rating.

5. Reinstall in the reverse order of removal

✽ NOTICE

The electronic system may not function correctly even when the engine room and internal fuse box's individual fuses are not disconnected. In such case the cause of the problem may be disconnection of the main fuse (BFT type), which is located inside the positive battery terminal (+) cap. Since the main fuse is designed more intricately than other parts, please visit the nearest Kia dealer and service center.

CAUTION

Visually inspect the battery cap for secure closing. If the battery cap is not securely latched, the electrical system may be damaged to due influx of moisture into the system.

Multi fuse
If the multi fuse is blown, it must be removed as follows: 1. Disconnect the negative battery cable. 2. Remove the nuts shown in the picture above. 3. Replace the fuse with a new one of the same ...

Fuse/relay panel description
■ Driver’s side fuse panel ■ Engine compartment fuse panel ■ Engine compartment fuse panel (Battery terminal cover) Inside the fuse/relay panel covers, you can find the fuse/relay lab ...

Other information:

Kia Niro (DE HEV) Owners Manual: Dual clutch transmission shift indicator in sports mode
If the driver selects “Sports mode” and changes gear, both higher and lower, the gear will automatically change to manual “Sports mode”. Depending on the selected gear, the gear display range will be from 1 to 6. Shifting up : ↑1, ↑2, ↑3, ↑4, ↑5 Shifting down : ↓2, ...

Peugeot 2008 2019-2022 Owner's Manual: Starting / Switching off the engine with Keyless Entry and Starting
The electronic key must be present in the passenger compartment. For versions equipped with Proximity Keyless Entry and Starting, the electronic key is also detected in the boot. If it is not detected, a message is displayed. Move the electronic key so that the engine can be started or switched ...

© 2016-2022 www.kniro.net