Kia Niro: Seat Electrical / Lumbar Support Units Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Seat Electrical / Lumbar Support Units Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front seat back cover. (Refer to Body - "Front Seat Back Cover")

3.	Disconnect the lumbar support motor connector (A).

4.	Separate the retaining clips (A) from the seat frame.

5.	Remove the lumbar support assembly (B) after disengaging mounting clip (A).

Installation

1.	Install the lumbar support assembly.

2.	Install the seat back cover.

Install the front seat assembly.

•	Make sure that the connectors are plugged in properly.

•	Check the lumbar support system.

Inspection

Lumbar Support Motor

1.	Disconnect the connectors for motor.

2.	When the battery power is supplied to the motor connector, check the motor for smooth operation.

3.	Reverse the connections and check that the motor turns in reverse.

4.	If the motor runs abnormally, replace it.

Air Ventilation Seat Repair procedures

Removal [Ventilation Blower] 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat assembly. (Refer to Body - "Front ...

Smart Key System

...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: General safety information and caution
Safety Precaution Precautions to take before servicing high voltage system Hybrid vehicles have high voltage batteries. Incorrect handling of high voltage sy ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the forward facing sensor. 3. Head a light to the rearward-faci ...