Kia Niro: Interior Trim / Luggage Side Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear seat assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

2.

Remove the rear door scuff trim.

(Refer to Interior Trim - "Door Scuff Trim")

3.

Remove the rear transverse trim.

(Refer to Interior Trim - "Rear Transverse Trim")

4.

Carefully remove the rear door body side weatherstrip and tailgate weatherstrip.

5.

Separate the rear seat belt lower anchor (A) after loosening the mounting bolt.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.8 - 39.8 lb·ft)

6.

Remove the rear pillar trim (A) after loosening the bolt.

7.

Remove the rear seat folding bracket (A) after loosening the bolts.

8.

Remove the luggage side trim (A) after loosening the mounting screws.

9.

Install in the reverse order of removal.

  

Replace any damaged clips.

Luggage Side Trim Components and components location
Component Location 1. Luggage side trim ...

Rear Pillar Trim Components and components location
Component Location 1. Rear pillar trim ...

Other information:

Kia Niro (DE HEV) Owners Manual: Seat belt precautions
WARNING All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collision or sudden stop. Without a seat belt, occupants could be shifted too close to a deploying air ...

Kia Niro 2017 (DE HEV) Service Manual: Turn Signal Lamp Repair procedures
Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder.    ...

© 2016-2024 www.kniro.net