Kia Niro: Lane Keeping Assist System (LKAS) / LKAS function change

The driver can change LKAS to Lane Departure Warning System (LDWS) or change the LKAS mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display. The driver can choose them by placing the ignition switch to the ON position and by selecting ‘User Settings’, ‘Driving Assist’, and ‘Lane Keeping Assist System’.

The system is automatically set to Standard LKA.

LKAS fail indicator
■ Type A ■ Type B The LKAS fail indicator (yellow) will illuminate with an audible warning if the LKAS is not working properly.We recommend that you contact an authorized Kia dealer. When ...

Lane Departure Warning system (LDWS)
The system can be converted to LKA to LDW at the User setting mode. Refer to User setting in section 4. LDWS alerts the driver with a visual and audible warning when the system detects the v ...

Other information:

Kia Niro (DE HEV) Owners Manual: List of voice commands
Voice command types • Voice commands are categorized into ‘Global Commands’ and ‘Local Commands.’ 1) Global Commands (●): Commands that can be used immediately after voice recognition is started. 2) Local Commands (O): Commands that can be used when radio, media or Bluetooth® pho ...

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description To correctly sense vehicles on the neighboring lanes using the radar, the direction of the sensor and the direction of the vehicle must be aligned. This is the BSD unit alignment. If this alignment is not performed as in illustration below, it may cause degradation of ...

© 2016-2023 www.kniro.net