To fasten your seat belt:
To fasten a 2-point static type belt, insert the metal tab (1) into the locking buckle (2). There will be an audible "click" when the tab locks into the buckle. Check to make sure the belt is properly locked and that the belt is not twisted.
With a 2-point static type seat belt, the length must be adjusted manually so it fits snugly around your body. Fasten the belt and pull on the loose end to tighten. The belt should be placed as low as possible on your hips (1), not on your waist. If the belt is too high, it could increase the possibility of your being injured in an accident.
When using the rear center seat belt, the buckle with the “CENTER” mark must be used.
To release the seat belt:
When you want to release the seat belt, press the button (1) in the locking buckle.
WARNING
The center lap belt latching mechanism is different from those for the rear seat shoulder belts. When fastening the rear seat shoulder belts or the center lap belt, make sure they are inserted into the correct buckles to obtain maximum protection from the seat belt system and assure proper operation.
Kia Niro 2017 (DE HEV) Service Manual: Pre-Charge Resistor Description and operation
Description
Built into the Power Relay Assembly (PRA), the Pre-Charge Resistor protects the
high voltage circuit by limiting the current while the inverter capacitor is being
charged.
1. High Voltage Power Terminal (-)
2. High Voltage Power Terminal (+)
3. ...
Kia Niro 2017 (DE HEV) Service Manual: Cylinder Block Repair procedures
Disassembly
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety i ...