Kia Niro: Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Removal

When replacing the LDWS switch, check that the symbol mark in the cluster operates normally by pressing the ON/OFF switch.

1.	Disconnect the negative (-) battery terminal.

2.	Using a screwdriver or remover, remove the mirror wiring cover (A).

3.	Disconnect the LDWS unit connector (A).

Remove the LDWS unit (B) by pulling out lock pins (A).

When pulling out the mounting bracket (A), be careful not to damage it.

Installation

1.	Install the LDWS unit.

2.	Connect the LDWS unit connector.

3.	Install the mirror wiring cover.

4.	Connect the negative (-) battery terminal.

Lane Departure Warning System (LDWS) Unit Components and components location

Components ...

Lane Keeping Assist System (LKAS)

...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Actuator Components and components location
Components Location 1. Auto Defogging Actuator ...

Toyota Corolla 2019-2023 Owners Manual: Checking the engine coolant
The coolant level is satisfactory if it is between the “FULL” and “LOW” lines (type A) or “MAX” and “MIN” lines (type B) on the reservoir when the engine is cold. ► Type A A - Reservoir cap B - “FULL” line C - “LOW” line If the level is on or below the “LOW” line, add ...