Kia Niro: Engine Control System / Knock Sensor (KS) Specifications

Specification
Item
Specification
Capacitance (pF)
850 - 1,150

Camshaft Position Sensor (CMPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition tim ...

Knock Sensor (KS) Description and operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise that can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses eng ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts in the following sequence. Tightening torque: 88.3 - 107.9 N·m (9.0 - 11.0 kgf·m, 65.1 - 79.6 lb·ft)    When using an impact gun, final ...

Kia Niro 2017 (DE HEV) Service Manual: License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. 3. Disconnect the license lamp connector (A). 4. ...

© 2016-2023 www.kniro.net