Kia Niro: Emergency starting / Jump starting

Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures. If in doubt, we strongly recommend that you have a competent technician or towing service jump start your vehicle.

CAUTION

Use only a 12-volt jumper system. You can damage a 12-volt starting motor, ignition system, and other electrical parts beyond repair by use of a 24- volt power supply (either two 12-volt batteries in series or a 24-volt motor generator set).

WARNING - Battery

Never attempt to check the electrolyte level of the battery as this may cause the battery to rupture or explode causing serious injury.

WARNING - Battery

Emergency starting
Connect cables in numerical order and disconnect in reverse order. ...

Jump starting procedure
1.Make sure the booster battery is 12-volt and that its negative terminal is grounded. 2.If the booster battery is in another vehicle, do not allow the vehicles come in contact. 3.Turn off all u ...

Other information:

Kia Niro (DE HEV) Owners Manual: Jack label
■ Example • Type A ■ Example • Type B ■ Example • Type C ❈ The actual Jack label in the vehicle may differ from the illustration. For more detailed specifications, refer to the label attached to the jack. 1. Model Name 2. Maximum allowable load 3. When using the jack, set ...

Kia Niro 2017 (DE HEV) Service Manual: Power Window Motor Repair procedures
Inspection    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Wh ...

© 2016-2024 www.kniro.net