Kia Niro: Engine Coolant / Inverter coolant

Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses.

The coolant level should be filled between MAX and MIN marks on the side of the coolant reservoir when the engine is cool.

If the coolant level is low, add enough specified coolant to provide protection against freezing and corrosion. Bring the level to MAX, but do not overfill. If frequent additions are required, we recommend that the system be inspected by an authorized Kia dealer.

Engine coolant
Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between MAX and MIN marks on the si ...

Recommended coolant
When adding coolant, use only deionized water or soft water for your vehicle and never mix hard water in the coolant filled at the factory. An improper coolant mixture can result in serious m ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Starter Generator(HSG) Repair procedures
Inspection 1. Inspect the resistance line to line using mΩ tester. Item Pin Specification Remarks Resistance (Line - Line) U - V ...

Kia Niro 2017 (DE HEV) Service Manual: Sunroof Sunshade Repair procedures
Replacement 1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2. Remove the drip rail assembly (A) after loosening the mounting screws. 3. Separate the rear drip (A) after l ...

© 2016-2024 www.kniro.net