Kia Niro: Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Description

Mounted inside the Manifold Absolute Pressure Sensor, Intake Air Temperature Sensor (IATS) detects the intake air temperature.

To precisely calculate the amount of air, correction of the air temperature is required as the air density varies with the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) thermistor with resistance in reverse proportion to the temperature.

Intake Air Temperature Sensor (IATS) Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 - 48.35 ...

Intake Air Temperature Sensor (IATS) Schematic diagrams
Circuit Diagram Harness Connector ...

Other information:

Kia Niro (DE HEV) Owners Manual: Seat warmer
■ Front seat ■ Rear seat The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passenger's seat. During mild weather or under conditions where the ...

Kia Niro 2017 (DE HEV) Service Manual: Relay Box (Engine Compartment) Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay block. Power Relay (Type A) Check for continuity between the terminals. 1. After supplying power to ...

© 2016-2022 www.kniro.net