Kia Niro: Dual Clutch Transmission Control System / Input Speed Sensor Specification
Kia Niro 2017 (DE HEV) Service Manual / DCT(Dual Clutch Transmission) System / Dual Clutch Transmission Control System / Input Speed Sensor Specification
| Specification |
|
Item |
Specification |
|
Type |
Hall effect sensor |
|
Operating condition |
-22 to 257 ° F (-30 to 125 ° C) |
|
Output signal |
High: 11.8 - 16.8 mA |
|
Low: 5.9 - 8.4 mA |
Input Speed Sensor Components and components location
Component Location
1. Input speed sensor
...
Input Speed Sensor Description and operation
Description
•
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the Transmission Control Module
(TCM) ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location
1. Sunroof
2. Sunroof switch
3. Sunroof motor & controller
...
Kia Niro (DE HEV) Owners Manual: Distributing the sealant
11. Immediately drive approximately 7~10km (4~6miles or, about 10min) to evenly
distribute the sealant in the tire.
CAUTION
Do not exceed a speed of 60 km/h (35 mph). If possible, do not fall below
a speed of 20 km/h (12 mph).
While driving, if you experience any unusual vibration, ride distu ...
© 2016-2023 www.kniro.net
