Kia Niro: Engine Control System / Injector Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.425 - 1.575 [20°C(68°F)]

Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Switch "ON" the ignition. 3. Measure th ...

Injector Description and operation
Description The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swi ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Troubleshooting Symptom Probable cause Remedy Play in steering Loose yoke plug Retighten Loose steering gear mounting bolts Retighten Loose or worn tie rod end ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description The high voltage battery system consists of the BMS ECU (Battery Management System ECU), Power Relay Assembly (PRA), safety plug, battery temperature sensor, and battery ambient sensor. Especially the BMS ECU controls SOC (State Of Charge), power, cell balancing, cooli ...

© 2016-2024 www.kniro.net