Kia Niro: Air Conditioning System / In-car Sensor Description and operation

Description

The in-car air temperature sensor is built into the heater & A/C control unit.

The sensor consists of a thermistor that measures the temperature inside the vehicle. The signal decided by the resistance that varies with the perceived inside temperature, is delivered to the heater control unit, based on which the unit regulates the in-car temperature to intended value.

Evaporator Temperature Sensor Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the evaporator temperature sensor connector. 3. Measure ...

In-car Sensor Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Using a remover, remove the crash pad side cover [RH] (A). ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Clutch Cover And Disc Components and components location
Components 1. Clutch disc 2. Clutch cover 3. Concentric slave cylinder 4. Hybrid motor assembly 5. Engine clutch actuator 6. Reservoir ...

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing by using these signals. Generally, the CKPS signal is used to detect the piston position whe ...

© 2016-2022 www.kniro.net