Kia Niro: Drive Belt System / Idler Repair procedures

Removal and Installation
1.

Remove the drive belt.

(Refer to Drive Belt System - "Drive Belt")

2.

Remove the idler (A).

Tightening torque :

39.2 - 49.0 N·m (4.0 - 5.0 kgf·m, 28.9 - 36.2 lb·ft)

3.

Install in the reverse order of removal.

Inspection

Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.

Drive Belt Repair procedures
Removal 1. Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2. Remove the ...

Drive Belt Tensioner Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the mechanical tensioner (A ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Fender Garnish Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

© 2016-2024 www.kniro.net