Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Specifications

Kia Niro 2017 (DE HEV) Service Manual / Service Highlight / Hybrid Control System / Hybrid Power Control Unit (HPCU) Specifications

Specification

Hybrid Power Control Unit (HPCU)

Item	Specification
Operating Voltage (V)	204 - 275.2
Operating Frequency (Hz)	Max. 826
LDC Output Voltage (V) [Auxiliary 12V Battery]	12.8 - 15.1
LDC Rated Power (kW)	1.8
Cooling Method	Water-cooled

Description and operation

Description The HCU (Hybrid Control Unit) controls whole hybrid systems and is connected with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface. In addition this sys ...

Hybrid Power Control Unit (HPCU) Components and components location

Components 1. Hybrid Control Unit(HCU) [HPCU] 2. Inverter [HPCU] 3. Low Voltage DC/DC Converter (LDC) [HPCU] 4. High voltage connector (↔ High voltage batte ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection 1. Disconnect the key warning switch connector (A) and ignition switch connector (B) from the steering column. 2. Check for continuity between the terminals. 3. If continuity is not specifi ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description System block diagram System function Camera unit of the LKAS processes below function with the video signal inputted 1. LKAS (Lane Keeping Assist System) : The system is designed to help recognize the lane ahead and to give off a lane departure ...