Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Hybrid Control System / Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Components

1. Hybrid Control Unit(HCU) [HPCU]
2. Inverter [HPCU]
3. Low Voltage DC/DC Converter (LDC) [HPCU]
4. High voltage connector (↔ High voltage battery system assembly)
5. High voltage connector (↔ Hybrid drive motor assembly)
6. High voltage connector (↔ HSG&Electric A/C compressor)
7. Low Voltage DC/DC Converter (LDC) supply output terminal (+)
8. DC Fuse (30A)
9. Low Voltage DC/DC Converter (LDC) ground terminal (-)
10. High voltage connector (↔ HSG&Electric A/C compressor)

Hybrid Power Control Unit (HPCU) Specifications
Specification Hybrid Power Control Unit (HPCU) Item Specification Operating Voltage (V) 204 - 275.2 Operating F ...

Hybrid Power Control Unit (HPCU) Description and operation
Description The Hybrid Power Control Unit (HPCU) is an integrated power conversion unit which consists of the two inverters, LDC, and HCU. ...

Other information:

Toyota Corolla 2019-2022 Owners Manual: Adjusting the set speed
To change the set speed, press the “+RES” or “-SET” switch until the desired set speed is displayed. 1 Increases the speed 2 Decreases the speed Fine adjustment: Press the switch. Large adjustment: Press and hold the switch to change the speed, and release when the desired speed is reache ...

Kia Niro 2017 (DE HEV) Service Manual: Fuel Pump Control Module (FPCM) Description and operation
Description Installed on the right hand side of the fuel tank, the Fuel Pump Control Module (FPCM) controls the DC motor mounted inside the low pressure fuel pump. The module compares instantaneous fuel pressure measured by the fuel pressure sensor (FPS) with target fuel pressure ...

© 2016-2022 www.kniro.net