Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Service Highlight / Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Components

1. Hybrid Control Unit(HCU) [HPCU]
2. Inverter [HPCU]
3. Low Voltage DC/DC Converter (LDC) [HPCU]
4. High voltage connector (↔ High voltage battery system assembly)
5. High voltage connector (↔ Hybrid drive motor assembly)

6. High voltage connector (↔ HSG&Electric A/C compressor)
7. Low Voltage DC/DC Converter (LDC) supply output terminal (+)
8. DC Fuse (30A)
9. Low Voltage DC/DC Converter (LDC) ground terminal (-)
10. High voltage connector (↔ HSG&Electric A/C compressor)

Hybrid Power Control Unit (HPCU) Specifications

Specification Hybrid Power Control Unit (HPCU) Item Specification Operating Voltage (V) 204 - 275.2 Operating F ...

Hybrid Power Control Unit (HPCU) Description and operation

Description The Hybrid Power Control Unit (HPCU) is an integrated power conversion unit which consists of the two inverters, LDC, and HCU. ...

Other information:

Kia Niro (DE HEV) Owners Manual: Engine Oil Pressure Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When the engine oil pressure is low. If the engine oil pressure is low: 1.Drive carefully to the nearest safe location and stop ...

Kia Niro 2017 (DE HEV) Service Manual: Trailing Arm Repair procedures
Removal 1. Disconnect the battery negative cable. 2. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...