Kia Niro: Hybrid Motor Assembly / Hybrid Drive Motor Assembly Specification

Kia Niro 2017 (DE HEV) Service Manual / Hybrid Motor System / Hybrid Motor Assembly / Hybrid Drive Motor Assembly Specification

Specification

Item	Specification
Type	PMSM (Interior Permanent Magnet Synchronous Motor)
Max. output	32 kW / 1,798 - 2,500 rpm
Max. torque	170 N·m / 0 - 1798 rpm
Cooling system	Water-cooled

Hybrid Drive Motor Assembly Components and components location

Components 1. Dual clutch transmission (DCT) assembly 2. Hybrid drive motor assembly 3. Concentric slave cylinder 4. Engine clutch actuator assembly ...

Hybrid Drive Motor Assembly Repair procedures

Inspection 1. Using mΩ tester, measure the line-to-line resistance. Item Inspection area Specification ...

Other information:

Kia Niro (DE HEV) Owners Manual: Snowy or Icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. If snow tires are needed, it is necessary to select tires equivalent in size and type of the original equipment tires. Failure to do so may adversely affect the safety and handlin ...

Kia Niro (DE HEV) Owners Manual: Care of seat belts
Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. WARNING When you return the rear seatback to its upright position after the rear seatback has been f ...