Kia Niro: Hybrid Control System / Hybrid Control Unit (HCU) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Service Highlight / Hybrid Control System / Hybrid Control Unit (HCU) Repair procedures

Removal

•	Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.

•	Be sure to shut off the high voltage before doing any work related with the high voltage system(Refer to "High Voltage Shut-off Procedure"). Failure to follow the safety instructions may result in serious electrical injuries.

Refer to “HPCU”.

The HCU is integrated into the HPCU that can’t be disassembled. So refer to “HPCU” for the removal or installation procedure of the HCU.

Installation

•	Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.

•	Be sure to shut off the high voltage before doing any work related with the high voltage system(Refer to "High Voltage Shut-off Procedure"). Failure to follow the safety instructions may result in serious electrical injuries.

Refer to “HPCU”.

The HCU is integrated into the HPCU that can’t be disassembled. So refer to “HPCU” for the removal or installation procedure of the HCU.

Hybrid Control Unit (HCU) Schematic diagrams

HCU Terminal And Input/Output Signal Terminal Function Connector [C133-S] Pin No. Description Connected to 1 ...

High Voltage Battery System

...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; preferably wall mounted. The LKAS camera will have a "System Out of Calibration& ...

Kia Niro 2017 (DE HEV) Service Manual: Engine Room Under Cover Repair procedures
Removal Engine room under cover. 1. Remove the engine room under cover (A). Tightening torque : 3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb·ft) 2. Install in the reverse order of removal. ...