Kia Niro: Checking tire inflation pressure / How to check

Use a good quality gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they're underinflated.

Check the tire's inflation pressure when the tires are cold. - "Cold" means your vehicle has been sitting for at least three hours or driven no WARNING - Tire Inflation more than 1.6 km (1 mile).

Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the pressure is low, add air until you reach the recommended amount.

If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gauge. Be sure to put the valve caps back on the valve stems. They help prevent leaks by keeping out dirt and moisture.

WARNING

Checking tire inflation pressure
Check your tires once a month or more. Also, check the tire pressure of the spare tire. ...

Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When r ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Heater Unit Components and components location
Component Location 1. Heater unit assembly Components [LH] 1. Heater Core Cover 2. Heater Core Assembly 3. PTC Heater 4. Duct Sensor 5. Shower Duct [LH] 6. Evaporator lower case insu ...

Kia Niro 2017 (DE HEV) Service Manual: Dynamic Damper Components and components location
Components 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Snap ring 12. TJ housing 13. T ...

© 2016-2024 www.kniro.net