Kia Niro: Hood / Hood Latch Release Handle Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement
1.

Using a remover, remove the hood release handle (A).

2.

Install in the reverse order of removal.

  

Make sure the hood latch cable is connected properly.

Make sure the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Components and components location
Component Location 1. Hood latch release handle ...

Hood Latch Components and components location
Component Location 1. Hood lower latch assembly ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Cowl Cross Bar Assembly Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Front Door Side Weatherstrip Repair procedures
Replacement 1. Loosen the front door checker (A) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft) 2. Detach the clips, and then remove the front door side ...

© 2016-2023 www.kniro.net