Kia Niro: Hood / Hood Assembly Repair procedures

Replacement
  

Be careful not to damage the hood and body.

  

Work in a group of two when removing and installing the hood.

Use a clip remover to remove clips.

1.

Remove the hood assembly (A) after loosening the hood hinge mounting bolts.

Tightening torque :

21.6 - 26.5 N·m (2.2 - 2.7 kgf·m, 15.9 - 19.5 lb·ft)

2.

Install in the reverse order of removal.

  

Make sure the hood locks/unlocks and opens/closes properly.

Adjust the hood alignment.

Hood Assembly Components and components location
Component Location 1. Hood assembly ...

Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specification Air Conditioner Item Specification Compressor Type HES27 (Electric Scroll) Communication type CAN communication Oil type & Capacity POE Oil, ...

Kia Niro 2017 (DE HEV) Service Manual: Reservoir Components and components location
Components Location 1. Reservoir ...

© 2016-2024 www.kniro.net