Kia Niro: Hood / Hood Assembly Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Components and components location

Component Location

1. Hood assembly

Repair procedures
Adjustment 1. After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. 2. Adjust the hoo ...

Hood Assembly Repair procedures
Replacement    Be careful not to damage the hood and body.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can cont ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Removal 1. Remove the wheel and tire. Tightening torque : 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)    Be car ...

© 2016-2022 www.kniro.net