Kia Niro: Body (Interior and Exterior) / Hood
- Repair procedures
- Hood Assembly Components and components location
- Hood Assembly Repair procedures
- Hood Insulator Pad Repair procedures
- Hood Weatherstrip Repair procedures
- Hood Latch Release Handle Components and components location
- Hood Latch Release Handle Repair procedures
- Hood Latch Components and components location
- Hood Latch Repair procedures
Front Seat Belt Buckle Repair procedures
Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Remove the front seat belt buckle (A ...
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolts, adjust the hood (B) by
moving it up and down, or right and left.
2.
Adjust the hoo ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Component Replacement After
Deployment
Before doing any SRS repairs, use the KDS/GDS to check for DTCs. Refer
to the Diagnostic Trouble Code list for repairing of the related DTCs.
When the fro ...
Kia Niro 2017 (DE HEV) Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor
(TPS)
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T.
and W.O.T.
[Throttle Position
Sensor (TPS)]
...
© 2016-2023 www.kniro.net
