Kia Niro: Lighting System / High Mounted Stop Lamp Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp Repair procedures

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the rear spoiler.

(Refer to Body - "Rear Spoiler")

3.

Remove the high mounted stop lamp cover.

4.

Remove the high mounted stop lamp (A) after loosening the mounting screws.

Installation
1.

Install the high mounted stop lamp.

2.

Install the high mounted stop lamp cover.

3.

Install the rear spoiler.

4.

Connect the negative (-) battery terminal.

License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. ...

Rear Combination Lamp Repair procedures
Removal Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the rear com ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Dynamic Damper Components and components location
Components 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Snap ring 12. TJ housing 13. T ...

Kia Niro (DE HEV) Owners Manual: Roof rack
If the vehicle has a roof rack, you can load cargo on top of your vehicle. Crossbars and fixing components needed to install the roof rack on your vehicle may be obtained from an authorized Kia dealer or other qualified shop. ✽ NOTICE The crossbars (if equipped) should be placed in the p ...

© 2016-2022 www.kniro.net