Kia Niro: Lighting / High beam operation

To turn on the high beam headlamp, push the lever away from you. The lever will return to its original position.

The high beam indicator will light when the headlight high beams are switched on.

To turn off the high beam headlamp, pull the lever to you when the high beam is on. The lever will return to its original position.

To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.

WARNING

Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver’s vision.

To flash the headlights, pull the lever towards you. It will return to the normal (low beam) position when released. The headlight switch does not need to be on to use this flashing feature.

Auto light
When the light switch is in the AUTO light position, the taillights and headlights will be turned ON or OFF automatically depending on the amount of light outside the vehicle. CAUTION Never ...

Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which tur ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Bumper Cover Components and components location
Component Location 1. Front bumper cover ...

Kia Niro 2017 (DE HEV) Service Manual: Battery Temperature Sensor Schematic diagrams
Circuit Diagram Battery Temperature Sensor (B06-1) Battery Temperature Sensor (B06-4) Air Inlet Temperature Sensor (B06) ...

© 2016-2024 www.kniro.net