Kia Niro: Front Seat Belt / Height Adjuster Repair procedures

Replacement
1.

Remove the front seat belt upper anchor.

(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")

2.

After loosening the mounting bolts, remove the height adjuster (A).

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Height Adjuster Components and components location
Component Location 1. Height Adjuster ...

Front Seat Belt Buckle Components and components location
Component Location 1. Front seat belt buckle ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description The HCU (Hybrid Control Unit) controls the overall hybrid systems and is connected with each of the control modules (ECM, TCM, MCU, BMS, ECU, etc.) via CAN. The hybrid system is controlled based on the brake switch signals.    ...

Kia Niro 2017 (DE HEV) Service Manual: Special service tools
Special Service Tools Tool Name / Number IIIustration Description Ball joint remover 09568-34000 Used to remove the ball joint Strut spring compressor 09546-26000 ...

© 2016-2024 www.kniro.net