Kia Niro: System operation / Heating
1. Set the mode to the 
position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if equipped) on.
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...
Operation Tips
To keep dust or unpleasant fumes from entering the vehicle through the ventilation
system, temporarily set the air intake control to the recirculated air position.
Be sure to return the contr ...
Other information:
Kia Niro (DE HEV) Owners Manual: Light bulb position (Rear)
■ Rear combination lamp - Type A
■ Rear combination lamp - Type B
■ Back up lamp
■ License plate lamp
■ High mounted stop lamp
(1) Stop/tail lamp(Bulb type)
(2) Tail lamp(Bulb type)
(3) Rear fog lamp(LED type)
(4) Rear turn signal lamp
(5) Stop/tail lamp(LED type)
(6) B ...
Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description
To correctly sense vehicles on the neighboring lanes using the radar, the direction
of the sensor and the direction of the vehicle must be aligned.
This is the BSD unit alignment. If this alignment is not performed as in illustration
below, it may cause degradation of ...
