Kia Niro: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications
| Specification |
HO2S [Bank 1/Sensor 1] (Linear)
|
Item |
Specification |
|
Heater Resistance (Ω) |
2.5 - 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2] (Binary type)
|
Item |
Specification |
|
Heater Resistance (Ω) |
Approx. 9.0 [20°C(68°F)] |
Knock Sensor (KS) Repair procedures
Removal
1.
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
2.
Remove the intake manifold. (Refer to Engi ...
Heated Oxygen Sensor (HO2S) Description and operation
Description
Heated Oxygen Sensor (HO2S), consisting of zirconium and alumina, is installed
on both upstream and downstream of the Manifold Catalytic Converter (MCC) to detect
the air/ ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine
forced activation mode
If the engine needs to be running constantly while the vehicle is stopped to
inspect emission gas or perform maintenance on the vehicle, follow below procedure
to enter engine forced activation mode.
1.
Place ...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Service Point Target Auto
Calibration (SPTAC)
This procedure provides a way to calibrate the camera by having the service technician
align the car to a well lit simulated straight road target; preferably wall mounted.
The LKAS camera will have a "System Out of Calibration& ...
