Kia Niro: Engine Control System / Heated Oxygen Sensor (HO2S) Schematic diagrams
| Circuit Diagram |
Harness Connector
[Bank 1 / Sensor 1]
[Bank 1 / Sensor 2]
Heated Oxygen Sensor (HO2S) Description and operation
Description
Heated Oxygen Sensor (HO2S), consisting of zirconium and alumina, is installed
on both upstream and downstream of the Manifold Catalytic Converter (MCC) to detect
the air/ ...
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the H ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: DCT(Dual Clutch Transmission) Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...
Kia Niro 2017 (DE HEV) Service Manual: Reservoir Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
2.
Drain the hydraulic oil from the reservoir using a syringe.
3.
Loosen the reservoir hose (A) and bolts (B) and then remove the reserv ...
