Kia Niro: Seats / Headrest (for front seat)
![](images/headrest_for_front_seat_-33/1/page_170.png)
The driver's and front passenger's seats are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort for the driver and front passenger, but
also helps protect the head and neck in the event of a collision.
WARNING
- For maximum effectiveness in case of an accident, the headrest should
be adjusted so the middle of the headrest is at the same height of the center
of gravity of an occupant's head. Generally, the center of gravity of most people's
head is similar with the height of the top of their eyes. Also, adjust the headrest
as close to your head as possible. For this reason, the use of a cushion that
holds the body away from the seatback is not recommended.
- Do not operate the vehicle with the headrests removed. Severe injury
to the occupants may occur in the event of an accident. Headrests may provide
protection against neck injuries when properly adjusted.
- Do not adjust the headrest position of the driver’s seat while the vehicle
is in motion.
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so you
can easily control the stee ...
To raise the headrest, pull it up to the desired position (1). To lower the headrest,
push and hold the release button (2) and lower the headrest to the desired position
(3). ...
Other information:
Kia Niro (DE HEV) Owners Manual: Power brakes
Your vehicle's brake system is powerassisted by the electric hydraulic pump.
In the event the brakes lose power because of a brake control system malfunction,
unstable power supply or some other reason, you can still stop your vehicle by applying
greater force to the brake pedal than you no ...
Kia Niro 2017 (DE HEV) Service Manual: Knock Sensor (KS) Repair procedures
Removal
1.
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
2.
Remove the intake manifold. (Refer to Engine Mechanical System - “Intanke
Manifold”)
3.
Remove the installat ...