Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad plate [LH] (A) after loosening the screws.
|
4. |
Disconnect the crash pad side switch connector (A).
|
5. |
Remove the crash pad side switch (A) after loosening the screws.
|
Installation |
1. |
Install the crash pad side switch. |
2. |
Connect the crash pad side switch connector. |
3. |
Install the crash pad plate [LH]. |
4. |
Install the crash pad lower panel. |
5. |
Connect the negative (-) battery terminal. |
Kia Niro (DE HEV) Owners Manual: Main fuse
If the main fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reinstall in the reverse order of removal
✽ NOTICE
The elect ...
Kia Niro 2017 (DE HEV) Service Manual: Concentric Slave Cylinder Assembly Repair procedures
Removal
1.
Remove the hybrid motor assembly.
(Refer to Hybrid Motor System - "Hybrid Motor Assembly")
2.
Remove the engine clutch actuator.
(Engine Clutch System - "Engine Clutch Actuator")
3.
...