Kia Niro: Headlamp and front fog lamp aiming / Head lamp low beam (LHD)

1. Turn the low beam on without driver aboard.

2. The cut-off line should be projected in the cut-off line shown in the picture.

3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

4. If head lamp leveling device is equipped, adjust the head lamp leveling device switch with 0 positions.

A : Vertical line of the left head lamp (low) bulb center
B : Vertical line of the right head lamp (low) bulb center
C : Horizontal line of head lamp (low) bulb center
D : Cut – Off line
E : Car Axis
F : Ground

Aiming point
A : Vertical line of the left head lamp (low) bulb center B : Vertical line of the right head lamp (low) bulb center C : Horizontal line of head lamp (low) bulb center D : Cut – Off line E ...

Head lamp low beam (RHD)
1. Turn the low beam on without driver aboard. 2. The cut-off line should be projected in the cut-off line shown in the picture. 3. When aiming the low beam, vertical aiming should be adjusted after ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure t ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Removal    Put on gloves to protect your hands.    Use seat covers to avoid damaging any surfaces. 1. Remove the roo ...

© 2016-2022 www.kniro.net