Kia Niro: Road warning / Hazard warning flasher
■ Type A
■ Type B
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
- Care must be taken when using the hazard warning flasher while the vehicle is being towed.
Road warning
...
In case of an emergency while driving
If the engine stalls at a crossroad or crossing
• If the engine stalls at a crossroad or crossing, set the shift lever in the
N (Neutral) position and then push the vehicle to a safe place.
If y ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description
To correctly sense vehicles on the neighboring lanes using the radar, the direction
of the sensor and the direction of the vehicle must be aligned.
This is the BSD unit alignment. If this alignment is not performed as in illustration
below, it may cause degradation of ...
Toyota Corolla 2019-2023 Owners Manual: Cleaning and protecting the vehicle interior
Perform cleaning in a manner appropriate to each component and its material.
Protecting the vehicle interior
Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a
cloth dampened with lukewarm water.
If dirt cannot be removed, wipe it off with a soft cloth dampened with neutral ...
