Kia Niro: Voice Recognition / Guide to the voice recognition screen

Voice recognition start screen

(1) Four most frequently used commands: The four most frequently used commands are displayed.

(2) Commands requiring additional settings: Commands that require additional settings before use are displayed.

(3) Voice status icon display.

Voice recognition standby.
Voice prompt in progress.
Processing voice command.

(4) User voice volume: User voice volume is displayed in real time.

(5) Recognition results: Results for voice command input are displayed.

(6) Help: Available voice commands displayed in stages.

(7) Exit: End voice recognition.

Voice recognition Help screen

(1) List of voice commands
- Available voice commands are displayed.
- Select or state each command to bring up additional detailed commands.

(2) Voice recognition instructions by item: Voice recognition instructions are displayed by item.

(3) Voice recognition usage instructions: General instructions for use of voice recognition are displayed.

Voice recognition usage instructions screen

(1) Usage instructions display: Detailed instructions on voice instruction usage.

(2) Close: Close the voice recognition usage instructions screen and show the previous screen.

✽ NOTICE

Starting/ending voice recognition, and settings
Starting voice recognition Press the [VOICE] button on the steering wheel remote control to start voice recognition and see the voice recognition screen. Ending voice recognition In voice re ...

List of voice commands
Voice command types • Voice commands are categorized into ‘Global Commands’ and ‘Local Commands.’ 1) Global Commands (●): Commands that can be used immediately after voice recognition ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Disc Brake Repair procedures
Removal 1. Remove the wheel & tire. 2. Remove the caliper hose bracket bolt (A). Tightening torque : 8.8 - 13.7 N·m (0.9 - 1.4 kgf·m, 6.5 - 10.1 lb·ft) 3. Loosen t ...

Kia Niro 2017 (DE HEV) Service Manual: Front Driveshaft Components and components location
Component location 1. Inner shaft bearing bracket 2. Drive shaft (RH) 3. Drive shasft (LH) ...

© 2016-2024 www.kniro.net