Peugeot 2008: Driving / Gear efficiency indicator

Peugeot 2008 2019-2022 Owner's Manual / Driving / Gear efficiency indicator

This system helps reduce fuel consumption by recommending the most appropriate gear.

Operation

Depending on the driving situation and the vehicle's equipment, the system may advise skipping one or more gears.

Gear engagement recommendations are only optional. In fact, the configuration of the road, the traffic density and safety remain determining factors when choosing the best gear. Therefore, the driver remains responsible for deciding whether or not to follow the system’s advice.

This function cannot be deactivated.

Peugeot 2008. Gear efficiency indicator With an automatic gearbox, the system is only active in manual operation.

Peugeot 2008. Gear efficiency indicator The information appears in the instrument panel in the form of an arrow and the recommended gear.

Peugeot 2008. Gear efficiency indicator The system adapts its gear shift recommendation according to the driving conditions (slope, load, etc.) and the driver’s requirements (power, acceleration, braking, etc.).

The system never suggests:

engaging first gear,

engaging reverse.

Hill start assist
This system keeps your vehicle briefly stationary (for approximately 2  seconds) when making a hill start, while you transfer your foot from the brake pedal to the accelerator pedal. This syste ...

Stop & Start
The Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stopped (red lights, queues, etc.). The engine restarts automatically - START m ...

Other information:

Toyota Corolla 2019-2022 Owners Manual: Manual transmission
Operating instructions ■ Shifting the shift lever 1 Depress the clutch pedal firmly. 2 Shift the shift lever to the desired gear. Make sure to only shift gears sequentially. 3 Gradually release the clutch pedal. It is difficult to shift in R, shift the lever to N, release the clutch pedal moment ...

Peugeot 2008 2019-2022 Owner's Manual: First steps
With the engine running, a press mutes the sound. With the ignition off, a press turns the system on. Increase or decrease the volume using the wheel or the "plus" or "minus" buttons (depending on the equipment). Use the menu buttons on either side of or below the touch screen for access to the ...

© 2016-2022 www.kniro.net