Kia Niro: Dual Clutch Transmission Control System / Gear Actuator Assembly Specification
| Specification |
|
Item |
Specification |
|
|
Resistance (line to line) |
Shift motor 1/2 |
126.4 mΩ ± 10% |
|
Select solenoid 1/2 |
0.7 Ω ± 10 % |
|
|
Max. current |
Shift motor 1/2 |
45 A |
|
Select solenoid 1/2 |
20 A |
|
|
Select solenoid sensor output |
Push |
4.0 ± 0.15 V |
|
Pull |
1.0 ± 0.15 V |
|
|
Operating condition |
-40 to 257 ° F (-40 to 125 ° C) |
|
|
Rated voltage |
13 V |
|
|
Sensor supply voltage |
8.75 V |
|
Gear Actuator Assembly Components and components location
Component Location
1. Gear actuator assembly
2. Shift motor 2 (Even)
3. Shift motor 1 (Odd)
4. Select solenoid 2 (Even)
5. Select solenoid 1 (Odd) ...
Gear Actuator Assembly Description and operation
Description
•
The gear actuator comprises the shift motor and select solenoid.
•
Gear actuator shift motor and select solenoid use signals fro ...
Other information:
Kia Niro (DE HEV) Owners Manual: Securing a Child Restraint System seat with “Top-tether Anchorage” system
Child restraint system top tether anchorages are located on the back of the rear
seatbacks.
1. Route the Child Restraint System top-tether strap over the seatback. Placing
the top tether strap, please follow the instructions of the Child Restraint System
manufacturer.
2. Connect the top- ...
Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Damper Pulley Repair procedures
Removal and Installation
1.
Remove the RH front wheel.
(Refer to Suspension System - "Wheel")
2.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
...
