Removal |
1. |
Switch "OFF" the ignition and disconnect the negative (-) battery terminal. |
2. |
Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly") |
3. |
Fuel pump service cover (A).
|
4. |
Remove the fuel pump control module connector (A). |
5. |
Disconnect the fuel pressure sensor connector (B). |
6. |
Disconnect the fuel feed tube quick-connector (C).
|
7. |
Lift the vehicle. |
8. |
Remove the center muffler. (Refer to Engine Mechanical System - "Muffler") |
9. |
Disconnect the vapor tube quick-connector (A).
|
10. |
Disconnect the fuel filler hose (A), ventilation hose (B) and leveling tube quick-connector (C).
|
11. |
Support the tank on a jack (A).
|
12. |
Remove the fuel tank band mounting nuts (A).
|
13. |
Remove the fuel tank & canister assembly (A).
|
14. |
Remove the canister assembly (A). (Refer to Emission Control System - "Canister" )
|
Installation |
1. |
Install in the reverse order of removal. |
Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location
1 . AVN head unit
2. External amplifier (Option)
3. Roof antenna (AM/FM+GPS)
4 . Multimedia jack
5 . Steering wheel remote control (SWRC)
6 . Hands-free mic (Built-in overhead console)
...
Kia Niro 2017 (DE HEV) Service Manual: Engine Mounting Repair procedures
Removal and Installation
Engine Mounting Bracket
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Install the jack to the edge of upper oil pan to support the engine. ...