Kia Niro: Fuel Delivery System / Fuel Pressure Sensor (FPS) Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Description and operation

Description

Installed on top of the low pressure fuel pump, the Fuel Pressure Sensor (FPS) measures the pressure in the low pressure fuel line.

Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to activate the low pressure fuel pump. After activating the low pressure fuel pump, the FPS continues to send the fuel pressure to the FPCM and the FPCM keeps controlling the fuel flow rate using the feedback from the FPS.

Fuel Pressure Sensor (FPS) Specifications
Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) [Vref = 5V] 50 (0.51, 7.3) 0.3 600 (6.12, 87.0) ...

Fuel Pressure Sensor (FPS) Schematic diagrams
Circuit Diagram Fail-Safe Mode Item Fail-Safe Output Voltage (V) 12    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Adjustment Glass Adjustment    Check the glass run channel for damage or deterioration, and replace it if necessary. 1. Remove the front door trim. (Refer to Front Door - "Front Do ...

Kia Niro 2017 (DE HEV) Service Manual: General information
Basic Service Symbols There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service. Symbol Meaning Do not reuse the part. Replace a new one. ...

© 2016-2024 www.kniro.net