Kia Niro: Fuel Delivery System / Fuel Pressure Regulator Repair procedures

Removal
1.

Remove the fuel pump.

(Refer to Fuel Delivery System - "Fuel Pump")

2.

Disconnect the fuel pump motor connector (A) and fuel sender connector (B).

3.

Lift the fixing hook (A) by using a common driver, and then remove the fuel sender (B).

4.

Remove the fixing clip (A), and then disconnect the feed tube (B).

5.

Remove the head assembly (B) after releasing the cushion fixing clip (A).

6.

Remove the reservoir-cup (B) after releasing the fixing hook (A).

7.

Disconnect the ground line (A).

8.

Disconnect the fuel pump motor connector (B).

9.

Remove the fuel pressure regulator (B) after releasing the fixing hook (A).

Installation
1.

Install in the reverse order of removal.

Fuel Sender Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector (A). ...

Fuel Line Repair procedures
Removal Low Pressure Fuel Line [High Pressure Fuel Pump ↔ Fuel Tank] 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - "Rele ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Door Inside Handle Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    If a DTC is present, perform troubleshooting in accordance wit ...

© 2016-2024 www.kniro.net