Inspection |
1. |
Switch "OFF" the ignition and disconnect the negative (-) battery terminal. |
2. |
Disconnect the fuel pressure regulator valve connector. |
3. |
Measure resistance between the fuel pressure regulator valve terminals 1 and 2. |
4. |
Check that the resistance is within the specification.
|
Kia Niro 2017 (DE HEV) Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS during idle with IG ON.
Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V) [Vref = 5V]
...
Kia Niro 2017 (DE HEV) Service Manual: Steering Column Shroud Panel Components and components location
Component Location
1. Steering column shroud upper panel
2. Steering column shroud lower panel
...